A.CONCERT 4

A.CONCERT 4 - A.CONCERT 4 FI

Features

CHANGING TIRES HAS NEVER BEEN SO EASY AND FAST!

BT_A-CONCERT-3_fast

 AIKIDO_34light_RPM

SUPER FAST Leverless tyre changers

Once a wheel is clamped on the plate, demounting and mounting (complete cycle) varies from 55” to 75” including run-flat and UHP.  Since 35” is the total time required to lift, lock, unlock and unload the wheel, the total time required for a complete cycle is as low as 90”-110” from floor to floor position.

 

INVEMOTOR

Speed set by the operator, exactly as required.
Inverter with governor to protect the tyre.


3 WORKING MODES

Standard
Automatic (like Aikido)
PC managed

 

BT_A-CONCERT-3_lavoro-mirato

 

BT_A-CONCERT-3_funz-automatico

 

TARGETED JOB

When turned on, the tyre changer asks to choose the requested function:

  • demounting/mounting tyres (standard operation)

  • repeated demounting (as removing tyres from rims at car wreckers)

  • repeated mounting (as in car manufacturing plants)

The pre-set and dedicated cycle reduces working times

 

 

AUTOMATIC MODE

Place the upper roller on the rim edge. Rotate the wheel and place the valve in start position. Press start button and the tyre changer is ready to work in automatic mode (Aikido program).

Once the first wheel is done, the start position will be reached fast and automatically to repeat the job again and again

 

BT_A-CONCERT-3_funz-PC

 

PC MANAGED OPERATION

  • Fill in the tyre dataThe software automatically selects the best program among: SOFT, STANDARD, RF/UHP

  • The user can decide to switch to another program (but the software does not allow programs which are not appropriate to that type of tyre)

  • Place upper and lower rollers at the rim edge and the valve at start position

  • Press start button and the tyre changer will carry out the programmed job with minimum assistance

  • At any time a job can be stopped and then continued with no need to start again the entire cycle.


BT_A-CONCERT-3_dischi BT_A-CONCERT-3_FI

 

PNEUMATICALLY OPERATED BEAD BREAKER DISCS

Built in scratch-proof material for complete rim protection. The rim edge sensor allows the roller to move forward automatically, enabling it to work on the bead without damaging the tyre’s sidewall.

 

 

F.I. VERSION

New, powerful tubeless tyre inflation system (for “F1” version) suitable for any rim diameter. Complete with a safety device to protect the operator.


BT_A-CONCERT-4_piatto BT_A-CONCERT-4_utensile

 

EXTRA-GRIP CLAMPING DEVICE.
THREE ADJUSTABLE WORKING HEIGHTS

Allows clamping with just one cone. Gripping pressure is automatically increased during rotation.

 

 

PATENTED LEVER-FREE TOOL. EFFORTLESS.

Fits between the tyre and rim and takes hold of the bead, gradually lifting it without the aid of bead-lifter levers. Made from scratch-proof material, it eliminates all risk of damage to the rim and allows operation close to the edge (zero-stress effect).


CONTROLLED HEIGHT

The tyre changer memorizes the height and calculates the working cycle consequently.
In case the plate is wrongly positioned for a certain tyre, a change of height is automatically requested.


BT_A-CONCERT-4_utensile02 

The bottom tool works on the second bead, lifting it and removing the tyre from the rim. Also used for mounting.